Grand Regulation In Detail – Regulation where the piano is - part 9

Whenever the subject of grand action regulating comes up, the thoughts always turn to benches, key levelers, and let-off racks. As others gloat about how they designed their own bench tops to try to duplicate the piano’s keybed, I usually wander off shaking my head asking myself, why so much bother when they could just use the piano itself? I agree that many of the procedures in the 50-point checklist must be done in the shop. These include such repairs as rebushing keys, refelting the keyframe, replacing keytops, etc.

However, many of the steps that may be done in the shop can also be done at the piano, or at least in the customer’s home. These would include such things as reshaping hammers, repairing action centres, polishing capstans, cleaning knuckles, etc. If the piano is not already in the shop for rebuilding, I much prefer to work right in the customer’s home. I have no need for an elaborate bench top, let-off racks, or Jarvas type key levelers! As a bench, I use the keybed of the piano, or if need be, my lap or the piano’s lid (padded of course with a moving pad). Instead of a let-off rack, I use the strings themselves (far easier and more accurate). In place of a key leveler I use a small straightedge about 15” long which I carry in my case. 

 

Also in my case is a good supply of punchings and other repair items so that I can arrive at a home to tune the piano, and end up staying there all day, reshaping hammers, doing action repairs, and a complete action regulation. I don’t work out of a large van either. In fact, many days I work out of a motorcycle! With experience I know what to bring to be prepared for the day’s troubles. In most cases, the customer would rather that I work on the piano in her home. She can watch what I am doing, the piano is not out of commission any longer than need be, and if any unexpected repairs crop up, l can consult with the owner while at the piano. It is certainly easier on me since I often work many miles from home, and it is awfully hard to carry a grand action home on my motorcycle. 

 

These reasons for working at the piano are secondary. Of real importance is the reduced time to complete the work (which means more money) and greater accuracy. Let us make a comparison of two equally fast working technicians, one who regulates at the piano, the other who carts the action back to the shop. Let’s pick a ten-year-old piano which has had normal usage. All that is needed are the usual minor adjustments to the action as a result of a little wear and settling in of the action parts, reshaping and voicing of the hammers, and tuning.

The first technician, who regulates at the piano, immediately proceeds to reshape the hammers. This can be done by turning the action around in the piano with the hammers facing the technician, or else putting the action on top of the piano. He then takes apart the action, removes the keys, reinstalls the action without the keys, and cleans everything prepatory to bedding the keyframe. After bedding he aligns all of the action parts, using thestrings ofthe piano as his guide. Next, he regulates the action mechanism in the piano, and lastly tunes and voices it. Approximate time: one working day.

The second technician, who is going to regulate the action at his shop, takes ...

Read more:

https://www.professionalpianotunerlondon.co.uk/post/grand-regulation-in-detail-regulation-where-the-piano-is-part-ix